Preparations for the holiday should be thorough, especially for events for children. Boys and girls are indescribably delighted when they see helium balloons pointing upward. Such festive attributes give the atmosphere a special atmosphere, but it is not always possible to assemble a composition from balloons from professionals. In emergency cases, you have to look for alternative methods at home.

Table salt and copper sulfate

Prepare cool filtered water, food foil, a glass bottle, table salt and copper sulfate in advance. To avoid skin damage, wear rubber gloves, a lab coat and clear protective goggles.

1. Unfold a sheet of foil and cut a plate measuring 18*18 cm into thin lines of about 0.5 cm, then send the strips into a liter glass bottle. Then add 75 g. copper sulfate and 85 gr. crushed table salt. Immediately cover the neck with your hand to prevent a reaction due to the admission of oxygen.
2. At this stage, you will need the help of a friend, since the procedure must be carried out quickly. Pour 430 ml into a bottle. filtered water, quickly put a ball on the neck and hold it at the base. Please note that the reaction will begin instantly, you will know this by the state of the mixture; it will go into the gaseous phase.
3. Try not to waste the mixture; one such composition is enough for several balls. On average, one balloon will take about 4 seconds to inflate, so don't hesitate.

Important!
Do not bring your face close to the bottle with the mixture to avoid damage to the skin and mucous membranes of the eyes. If the balloon bursts or falls off the neck, you could be seriously injured. Hold the vessel at arm's length.

When the chemical reaction begins, the bottle will become hot in short time. To avoid burns, you can dip it in cool water or press it with an unnecessary cloth/towel.

Sodium hydroxide

The alkaline solution is dangerous for the skin, so be sure to wear gloves, a gown, and safety glasses. Sodium hydroxide is a mixture of caustic soda and concentrated (caustic) sodium, which in itself is unsafe. Carry out the procedure away from children and pets, be sure to ventilate the room before and after inflating the balloons.

Prepare warm filtered water, sodium hydroxide (lye), industrial or hookah foil (thick), and a liter glass bottle.

1. Fill a bottle with 450 ml. clean warm water.
2. Take one plate of foil measuring 20*20 cm. Divide it into thin lines or chop it into very small pieces, add it to a reservoir of water.
3. Measure out exactly 20 grams. sodium hydroxide and carefully pour it into the bottle, be sure to do this while wearing gloves.
4. Pull the base of the ball over the neck of the vessel, clamp it well so that the ball does not fly off.
5. Shake the container until the foil is completely immersed in the mixture.
6. You will see that the balloon will begin to inflate, do not try to take in too much helium at a time, it is better to stretch the composition into several doses.

This technique is considered the safest because it does not include alkali or other industrial concentrates. However, precautions must be followed. Always use silicone or rubber gloves, wear glasses, and a gown.

Prepare a vinegar solution (ordinary table vinegar), its concentration should not exceed 9%. Make sure you have baking soda on hand.

1. The peculiarity of the method is that the composition is poured not only into the bottle, but also into the ball. Pour 45-55 ml into the vessel. vinegar solution, pour 30 grams into the ball. baking soda, then place the base over the neck of the container.
2. Carefully turn the ball over so that the baking soda pours into the vinegar. The reaction will occur instantly: the container will become warm and the balloon will begin to inflate.
3. To fill the next balls, clean the cavity of the bottle from the previous composition, wipe dry and repeat the manipulations. The container must be dry, otherwise moisture will suppress the reaction.

Electrodes and battery

To prepare the composition, you will need to acquire a 12-watt battery, an electrolyte (sulfuric acid or potassium hydroxide will do), and graphite electrodes (not copper!). In addition to the main components, make sure you have two liter plastic bottles, a plastic laundry basin and clean filtered water. As with all previous methods, protect your skin and eyes (wear a gown, gloves, goggles).

1. Take a 15-liter basin, fill it clean water half.
2. Pour potassium hydroxide/sulfuric acid (electrolyte) into the first liter bottle, leaving a distance of 3-4 cm from the edge of the neck.
3. Take the ball and place the base on the hole in the container, then make small holes in the bottom of the container and insert the electrode. Maintain tightness; the holes should not be wide so that the device fits tightly into the vessel.
4. Do the same with the second bottle, following the sequence. When everything is ready, move on to the next step.
5. Place both bottles in a basin, place the battery next to it and connect the electrodes to it, observing the polarity (plus “+”, minus “-”).
6. Connect the battery to a power source and watch for the reaction to begin.

An important feature of this method is that only one ball, located on the side with negative polarity, will be able to rise upward (it will be filled with hydrogen). The second ball will be saturated with oxygen, so it will be of little use.

Make sure in advance that you have the necessary materials and tools at hand, and follow safety precautions. Complex methods using electrodes and a battery, as well as sodium hydroxide should be entrusted to a man. Women will be able to make the preparation of a mixture of soda and vinegar, salt and copper sulfate a reality.

Video: DIY flying balloon without helium

Balloons, flying and colorful, instantly create a festive atmosphere. Choose any balloons from our range and we will immediately inflate them with helium! The LILITOP delivery service operates in Moscow and St. Petersburg.

If you are choosing what to inflate balloons with, give preference to helium. This is the lightest gas after hydrogen, it is non-flammable and absolutely non-toxic, has no color or odor. They can be used to fill balloons of any size for holiday decorations, promotions and other events.

Modern air balloons appeared back in 1824 during the experiments of Michael Faraday. At first they were used exclusively within the walls of the laboratory, and after 80 years they turned into widespread fun.

Why are helium balloons so popular?

• This is the simplest and most budget-friendly option for decorating any event. Helium balloons are inexpensive to inflate; they look good either individually or assembled into arches or other compositions.
• This is an indispensable prop for various competitions. Many holidays feature games involving balloons.
• Balls come in a variety of shapes and sizes. There are large and small round, oval models, in the form of a heart, stars, and animal figures.

Once you inflate the balloons with helium, a festive atmosphere is created. Contact the LILITOP company - we will help you prepare for any celebration.

Features of the service

If you inflate a balloon with helium, it literally begins to burst into the sky. Volatile gas allows designers to come up with and bring to life the most incredible decorations. But in order for the product to please you for as long as possible, you need the help of a professional.

We offer:

• certified products (foil, latex) in a variety of colors;
• professional equipment that allows you to inflate balloons with helium in the required quantity in the shortest possible time;
• treatment with an environmentally friendly Hi-Float compound, which extends the flight life to 3 days (for latex).
• Want to inflate balloons with helium yourself? Our catalog contains portable cans of “fun” gas. They will extend the life of your flying joy. Carefully observe safety precautions and follow the manufacturer's recommendations.

Our clients get the best prices! After the first order in the amount of 1000 rubles. you acquire bronze status and receive a personal discount of 5%. Maximum discount - 15%! There is a “Bring a Friend” promotion.

You can find out how much it costs to inflate balloons with helium, as well as ask other questions by phone. Orders are accepted online, delivery is available around the clock, seven days a week. Our couriers are not late!

*excluding sticks and clamps

**excluding ribbon and Hf

Previously, preparations for the holiday took a lot of time: you had to go to the store, buy and inflate helium balloons yourself in Moscow. Then figure out how to decorate the room. Now everything is quite simple, all you need to do is, without leaving your home, go to our online store and place an order for balloons. Sales are carried out both wholesale and retail, but the price per unit depends on the quantity. The more quantity you purchase, the less their cost.

Are you wondering where you can inflate balloons with helium in Moscow? The answer is obvious - in the company "GdeRadost". Order or buy Balloons inflated with helium possible with current promotions. Therefore, keep an eye out for profitable offers on the website.

Exclusive holiday decoration can be achieved if you involve aerodesign professionals in this. This way you will get wonderful decorations for a wedding, anniversary, corporate event or other occasion that requires solemnity. You can decorate the event with the help of voluminous garlands, arches, fountains, stands and points. And congratulate the heroes of the occasion with the help of a panel made in the form of an inscription. The launch of glowing balls into the night sky or their mass release is perfect for a bright show.

Delivery of inflatable balloons with helium: transportation and transportation

Many people are wondering how to transport such an unusual cargo without damaging it and delivering it safely? After all, despite its apparent simplicity, this is quite a risky business and requires patience and caution. Let's consider the nuances that you may encounter when transporting helium balloons for a holiday from the point of receipt to the place of celebration.

In an effort to save money, some, wanting to please their family and friends with unusual gifts, choose far from best ways. They buy balloons and try to inflate them with helium at home. But this is a huge risk.

Dangerous Alternative

The only relatively safe method is to fill a regular latex balloon using a hand pump or your own lungs. In the worst case, such a ball will burst, you will flinch from the deafening sound, your cat will instantly become a record holder in the “bullet under the sofa” discipline, but at least this is not dangerous.

A much less rosy prospect awaits all those who intend to synthesize helium “privately” and use it to fill balloons.

Helium is a gas that cannot be synthesized in your own living room. The process requires special conditions - low temperatures. That is why we must abandon all attempts to enroll in the guard of crazy chemists. It’s easier and safer to trust professionals in this matter.

All descriptions on the Internet, with the help of which beginners master the method of obtaining flying balls, do not contain the main thing - warnings about the high risk of explosion during such manipulations.

Most often, video bloggers teach their subscribers how to create supposedly helium using baking soda and table vinegar. But in reality, what is produced is not the expected helium, but hydrogen.

And the “chemical experiment” to get just one ball, which, in addition, does not “know how to fly,” can cause serious health problems.

Little secrets

Sometimes people buy balloons on their own and bring them to an agency selling air bouquets with a request to inflate them with helium. This will not bring success because:

• often thrifty citizens buy poor quality balloons that burst before they are fully inflated;
• companies purchase latex or foil balloons in bulk, so their price as part of the total price of the work will be even lower than the cost of the brought balloon (the cost of helium is almost 90% of the total installation price);
• Additionally, you will have to hastily look for a ribbon or plastic tube to secure the tail of the ball.

Regarding the last point, professionals warn: the usual home method of fixing the neck of a ball by tying a knot on its “neck” is not suitable if you do not take care of the presence of a ribbon in advance.

Helium and latex = best friends

It is a mistake to believe that only foil balloons, which are made from nylon, can make good couple helium filler. Latex balloons also work well with this volatile gas.

During the cold season, absolutely any helium balloon outdoors will lose a little in size, and then (already in the warmth) will be restored. Therefore, in terms of reliability, there is no difference between latex and shiny nylon. Unless the latter boasts a large selection of figurines for creating unusual gifts.

If the balloons are first inflated with real helium at home/office/any other room, then taken out into the frosty air, and after an hour they fall back into comfortable temperature, then “heavy artillery” will be needed to preserve their volatile properties. Its role is played by a special liquid polymer, which is used to treat the inside of the ball. This allows the inflatable star or Elsa from Frozen to stay in the air a third longer than usual.

Ace in the hole

Another advantage of professionals in inflating and modeling balloons is the ability to create luminous air compositions based on the same helium. Coping with such a task on your own is extremely problematic and costly.

LED balls can become the basis for a “starry” or “cloudy sky”, which is created from balls of several types and colors. Such "heaven" - good gift to a personal date that is significant for lovers. Also, this decorative element is often used by designers to decorate entertainment venues and banquet halls.

Inflating balloons with helium came to us later than this gas began to be used in balloons. Due to its special properties, inflating the ball with this substance has led to expanded possibilities for interior design and its use as an indispensable element of the holiday. Today, inflating balloons with helium is a common thing in Moscow. Inflation is common at public events and during promotions. People want to buy helium attribute for birthdays and weddings. Decorating a window, especially a new store, is incomplete without them. There are many options to become the owner of this air element: inflate balloons with helium at home or buy an inexpensive attribute in a Moscow stall.

Use Cases

You can buy balloons inflated with helium in different variations. The main ones are the following:

• Pump up helium gas attributes with an inscription or various drawings. This type of inflation is very popular for promotional purposes. The company logo will look bright. The balloon will attract the attention of passersby. Modern technologies have significantly expanded the possibilities;
• Pump up colorful balloons. They will decorate the room. Inflating balloons with helium is also in demand for public events, for example, the last bell at school;
• Inflate glowing balloons with helium. This is an incredible option for launching into the night sky! Delivery of such an inflatable element must be completed without delay and not earlier than the appointed time. It is also impossible to pump it up in advance, so as not to lose the brightness of the colors;
• Pump up your latex heart. This is an inexpensive option to once again express your love and favorable attitude. At home, the attribute will last a long time and will not look cheap.
• You can also inflate balloons with helium cheaply: if you buy the attribute yourself and inflate it yourself from a balloon. You can save money on inflation. But there is also a minus: a cheap balloon will burst quickly; not everyone is suitable for inflation. Therefore, it is more advisable to buy balloons inflated with helium. We will help in .

BallDecor: how to order

We suggest ordering an inflated balloon with helium at an inexpensive price from BallDecor. We have both cheap and premium options. The cost also depends on the scope of the service. The price of inflating balloons with helium in Moscow is more profitable the more air attributes you need for the holiday. By the way, now many people launch thousands of balloons into the sky.

You can call an aerodesigner to your home so that he can assess the scope of work and offer best options organization and decoration of the holiday. The preliminary price for inflating balloons with helium in Moscow will be announced by a specialist immediately. The exact calculation in rubles will be ready after agreeing on all the nuances of the holiday.

It should be noted that the pumping of attributes occurs both at home and we bring finished products. This is especially true when you have to buy complex compositions.

We can inflate balloons with helium inexpensively if you order a courier with a balloon. This service is relevant when you do not need complex decoration of the premises and organization of the holiday as a whole. The inflating option is cheap and much more profitable for you, since you will not need to go around the stores looking for suitable products and a gas cylinder. And then you still need to get used to it, because the balloon can inflate more and burst.

Cooperating with BallDecor is easy: call us, write to us or leave your contact information in the feedback form. We will certainly contact you and discuss the intricacies of the upcoming festive event.

There is nothing more valuable than unforgettable impressions. And this is what we have really succeeded in. See for yourself! BallDecor: airy mood is our gift to you!