How to make slime from baby oil. A fun toy with your own hands or how to make slime.

07.11.2018 Trips

If mom, if dad
We were gone for a while,
Don't rush to destroy the apartment,
There is a lesson for "five".
You and your friends will get together
(Three or four people) –
And let's go on the walls in the house
Throw super-lickers!

The first slime toy, or slime(slime) was released by Mattel back in 1976. And it has earned popularity due to its properties - both fluidity, elasticity and other unusual capabilities. Possessing characteristics of a non-Newtonian fluid, it quickly became popular with children and adults. And since it was not possible to buy it everywhere, they soon learned to reproduce the funny substance at home. At the request of readers, we will present one of the simple recipes for creating a slime toy in the article.

So, how to make slime at home

Making slime at home slightly different from the original. For example, guar gum is not as easy to purchase in a store as other ingredients. Therefore, we will take much more accessible substances. It will be:

1. PVA glue. White, preferably fresh, glue can be purchased at any office supply store, in the school supplies section. For making small slime we need about half a glass, about 100 grams. (Fresh – one to two months from the date of manufacture)
2. Water– ordinary tap water. If desired, you can take boiled, at room temperature. You will need a little more glass.
3. Sodium tetraborate, borax or borax. Can be purchased at a pharmacy in the form of a 4% solution.
4. Food coloring or a few drops of greenery. The original slime is green, and brilliant green is perfect as a coloring agent. If you wish, you can take a little beet juice or other natural coloring. However, it is worth remembering that a trace of the dye can remain on any surface used and on your hands. You can also experiment with different types of glitter.
5. Beaker, utensils and mixing stick. As a stick, you can take a pencil, spoon or any other suitable object.

Let's move on to the process itself.
– Dissolve a tablespoon of borax in a glass of water (or use a ready-made aqueous solution of borax, or with glycerin).
– Turn a quarter glass of water and a quarter glass of glue into a homogeneous mixture in another bowl. If desired, add dye there. However, you can do without it.
– While stirring the adhesive mixture, gradually add a borax solution, about half a glass. Stir until a jelly-like homogeneous mass is obtained.
– Let’s check the result: the thickened substance is, in fact, a slime toy. You can put it on the table, crush it, tear it and check all its original properties.

By experimenting with solutions, you can get a slime of varying elasticity - more “rubbery” or jelly-like. In any case, it is worth remembering that the creature is delicate and requires some care. You should regularly pay attention to it, do exercises with it, knead and twist it to train your “muscles”.
It is not recommended to feed the slime with salt or grated eraser (this happens). This can cause it to deteriorate, become liquid or, at a minimum, heterogeneous, and separate in its composition.


Keeping a funny animal - slime toy, stands strictly in a closed container. It may be plastic or glass jar, a box or even a durable plastic bag. Slimes love cool weather and dry quickly in the heat. If the toy begins to lose its properties - for example, to become fragile, you can add a little water to it. When this does not help, it is better to prepare the ingredients and make the slime again - for example, a different color, a stronger or more delicate consistency. And then write your reviews and impressions in the comments to see if everything worked out for you. Perhaps recommend something to other readers.

Those who prefer needlework of a different nature - for example, making soft toys themselves - will be interested in the assortment of the online store NataToys.ru. A talented team of needlewomen offers original kits for making funny little animals, decorative pillows and even fur coats for children. mobile phones. If you wish, you can choose and purchase handicraft goods there in bulk, with a good discount - for yourself or to replenish the assortment of the online store. Or just buy a kit and sew a cute soft pug, chihuahua or dachshund for your baby. Unlike slime toys, soft toys will not leave stains on the wallpaper. And you can play with them for much longer.

More recently, the film “Ghostbusters” captivated a multimillion-dollar audience of viewers to their TV screens. One of the main characters of the film was a funny character named Lizun, also known as slim and handgam, which is distinguished by the fact that it can spread, stretch and change its shape in different ways.

What can Lizun be made from?

Exist different ways, how to make Lizun from water and soda, plasticine, shampoo, glue. Of course, you can buy this toy in a store, but it’s much more interesting to make it yourself.

Method No. 1


Those who are lucky enough to learn how to make a Slime from soda and glue will receive a fun toy that can be given any color you wish.

You need to prepare:

  • PVA glue.
  • soda;
  • if necessary, food coloring;
  • plastic containers;
  • mixing stick;
  • latex gloves.

Preparation method

  1. Mix a quarter glass of water at room temperature and about 50 g of glue in a plastic container until a homogeneous mass is obtained.
  2. Add dye of the desired color and mix.
  3. In a separate container, mix a quarter glass of water and a tablespoon of soda.
  4. Stir the mixture of water and glue, pour the soda solution into it.
  5. Lizun is ready.

Method number 2

A slime made from soda and plasticine, due to its stability due to the density that plasticine gives it, will be able to keep its shape longer.

For cooking you will need:

  • food gelatin;
  • plasticine;
  • container for cooking. It is better to use plastic dishes;
  • metal container;
  • a spatula that will facilitate the mixing process.

Preparation method

  1. Pour cold water into a metal container and dissolve gelatin in it. Let stand for an hour.
  2. Place a metal container on the fire and bring the contents to a boil. Remove the container from the heat as soon as the mixture begins to boil.
  3. Warm up the plasticine in your hands - about 100 g.
  4. Pour warm water (about 50 g) into a plastic container and thoroughly mix the plasticine with it using a spatula.
  5. Pour gelatin into a bowl with plasticine, bring to a uniform consistency.
  6. Place the mixture in the refrigerator. Cool.

Method number 3

Thanks to this recipe, you can make a cute Slime from soda and shampoo.

Will need

  • shampoo;
  • glue;
  • latex gloves.

Cooking method

  1. Pour glue and shampoo into a plastic bag in a ratio of 3:2.
  2. Stir until thickened.
  3. To give Lizun a pleasant smell, you can add essential oil to the mixture, and glitter for beauty.

Making Lizun at home with children is not only a pleasant activity, but also a useful one, which helps improve fine motor skills of the fingers, thereby increasing brain activity.


Slime is the happiness of children of the 90s of the last century and the nightmare of their parents. The toy received the name “lizun” after the release of the film “Ghostbusters”, where one of the characters bore this name. The little voracious ghost ate everything that came in his way, crashed into pieces at speed on all sorts of obstacles, and loved to give slobbery kisses. Children fell in love with the toy for its resemblance to this on-screen character. And now many of them are purchased as slimes in stores, and those who are more economical and inventive make their own at home.

What is this strange toy?

If you see a plastic jar or container on sale filled with a jelly-like substance with the words “Slime” or “Slime” on the packaging, then this is it. You can understand what it is only by holding the slime in your hands. It is soft to the touch, wrinkles and stretches well, sticks to the walls and then slides off them, often leaving greasy stains.

Left alone, the slime spreads over the surface in a puddle, but is easily gathered into a lump with your hands. It can stick to your hands, flow through your fingers, but become elastic when it hits a wall.

Initially, slime was made from guar gum, a polysaccharide, and sodium tetraborate, better known as borax. The result was a material similar to slime, but with the properties of a non-Newtonian fluid. It does not spread, is easy to assemble, and compacts upon impact.

There are many types of slimes, here are some of them:

Slime. The mass, similar to jelly, is usually transparent. Doesn't stick to your hands, flows through your fingers in long threads, and spreads over a hard surface into a puddle.

Mucus is soft and sticky

Antistress. This is mucus placed in an elastic shell covered with a mesh. Forms bubbles when pressed.


“Anti-struss” slime relieves nervous tension well

Gum for hands. More dense elastic mass. It is easy to wrinkle and stretch.


Chewing gum for hands is more dense and elastic

Jumper. The densest slime. It is less elastic, but resilient. Bounces off hard surfaces.


The elastic bouncer bounces well off hard surfaces

Fluffy slime. Fluffy and very pleasant to the touch. It wrinkles and stretches well.


Fluffy slime is the most fluffy and airy slime

Plasticine. Keeps its shape better than others. Due to its plasticity, various figures can be sculpted from it.


Plasticine holds its shape better than others

There are slimes that stick well to surfaces, matte, transparent, with foam balls, pearlescent, glowing, and in various colors.

Of course, you can buy such a toy in a store, but it’s more interesting to make it yourself using improvised materials. Moreover, this is not difficult to do.

How to make different types of slimes at home

What the industry uses to make modern slimes is not known for certain, but it is a fact that when sodium tetraborate is used in home production, the substance turns out to be very similar to a store-bought toy. Let's start with this recipe.

Made from sodium tetraborate and PVA glue

Let's prepare all the ingredients:





Now you can pick it up, pull it, crush it, throw it and put it back together - the slime is ready.

Advice! When choosing a dye, remember that some of them stain your hands.

With hair or shaving foam

Fluffy slime is made using the same recipe. To give the slime fluffiness, hair or shaving foam is added to the composition.

  1. Pour the glue into a suitable container.
  2. Attach foam to it. the amount depends on how fluffy the mass should be. Stir.
  3. Add a dye, you can use aniline or any other. Mix thoroughly again.
  4. Pour sodium tetraborate into the mixture little by little while stirring. As soon as the composition thickens enough and begins to lag behind the walls of the dish, you can pick it up and play.

The main condition for success in making this type is good glue. If it doesn’t thicken, all your work will go down the drain and nothing will work out.

From PVA glue and soda

But not only borax is used as a thickener. Baking soda performs this function perfectly.

  1. Dissolve baking soda in a small amount of water.
  2. Pour the glue into a bowl, add dye and mix.
  3. Add little by little soda solution while stirring thoroughly. Wait for the mass to thicken. This will not happen right away, so don’t rush to add more soda solution.
  4. Mash the finished mass in your hands. It will turn out even softer and more tender than the previous one, it wrinkles and stretches well.


Slime can be made shimmering by adding glitter to it.

Made from alcohol and silicate glue

Used to make slime and silicate glue. But the properties of the toy will be different.

  1. Pour glue into a bowl and add color with any dye.
  2. Stirring in a circular motion, add alcohol little by little. You will see how the mass thickens, forming dense lumps.
  3. Leave the substance to rest for 20 minutes.
  4. Gather into a ball and knead well with your hands. This slime will not stretch or stick; its consistency is quite dense. But he will make an excellent jumper.
  5. Roll the mixture into a ball and try to hit it on the floor. The elastic ball bounces well off hard surfaces.

From starch and hydrogen peroxide

A hard bouncy ball can be easily made using ordinary starch. This does not require large expenses; the toy will cost pennies.

  1. Mix 100 g of starch with 200 ml of hot water until a jelly-like mass is obtained.
  2. Let cool and combine with 100 ml of PVA glue.
  3. Add a suitable dye and a few drops of hydrogen peroxide. Mix everything well. Hydrogen peroxide will give the toy lightness and airiness.
  4. Roll the resulting mass into a ball. The jumper is ready.

Video instructions for making slimes from glue

From Titan glue and shampoo

A simple way to make slime is with Titan glue. This glue is non-toxic, and after drying it does not lose elasticity.

  1. Mix glue with shampoo in a ratio of 3:2. The color and transparency of the toy will depend on the shampoo. For greater color intensity, add dye.
  2. Leave the mixture to thicken for a while, usually 5 minutes.
  3. Lizun is ready. Simple and fast.

This recipe does not always yield the desired result; different shampoos behave differently. But it's worth a try, because you have nothing to lose.

Advice! Stir the mixture until it leaves the sides of the bowl and stops sticking to your hands. These are signs that the toy is ready.

From a glue stick

Another type of glue - pencil, is also quite suitable for this purpose. Here we again need sodium tetraborate.

  1. To do this you will need 4 glue sticks. Remove the rods and place in a fireproof container.
  2. Using a microwave or oven, melt the rods until a viscous mass forms.
  3. Add dye to the glue mixture and mix.
  4. In a separate bowl, dissolve borax in a small amount of water.
  5. Add the solution to the glue little by little, stirring constantly, until the required consistency is obtained.

Two video recipes for making slime

Made from plasticine

Slime can be made not only from glue. A good and durable toy is made from plasticine.

You will need:

  • plasticine - 100 g;
  • gelatin - 15 g;
  • water - 250 ml.
  1. Soak gelatin in 200 ml cold water using fireproof containers.
  2. When the gelatin swells, bring it to a boil over low heat and immediately remove from heat. Let cool slightly.
  3. Knead the plasticine until it becomes soft. Mix with remaining water.
  4. Combine still warm gelatin with plasticine, mix well until smooth.
  5. Place in the refrigerator for half an hour.

This toy can be given to children without fear, because it contains no harmful substances. There is a small problem: this type leaves greasy stains on the wallpaper. Make sure children don't throw it at walls.

From toothpaste and liquid soap

Quite safe option- slime made from toothpaste. You can use regular and gel paste.

  1. Mix 20 ml of toothpaste and liquid soap with 5 teaspoons of flour.
  2. Stir until there are no lumps, first with a spoon and then with your hands. To prevent the mixture from sticking to your hands, moisten them with water and knead them well again.

From soap and shampoo

For the next type you will need only two ingredients that can be found in any home. This is liquid soap and shampoo for hair.

  1. Mix liquid soap and shampoo in equal proportions until smooth.
  2. Place in the refrigerator overnight.
  3. Take it out and have fun.

Since this slime is made of water-soluble substances, keep it away from moisture. The warmth of your hands quickly softens the toy; it should be stored in the refrigerator. And do not allow it to come into contact with dust and dirt; it will not be possible to wash the slime. If treated with care, this toy will last about a month.

From hand cream and perfume

You can even make slime from hand cream. There is no guarantee that the toy will work, but it's worth a try.

  1. Squeeze the cream into a bowl.
  2. Add paint and mix.
  3. Add perfume little by little and mix everything thoroughly. The mixture will begin to thicken.
  4. Having achieved the desired consistency, knead the toy with your hands.

From flour

Parents are often afraid to give slime to young children for fear that they will put it in their mouth. For such a case, you can make a completely safe, edible slime without chemicals.

For this you will need:

  • flour - 400 g;
  • cold water - 50 ml;
  • hot water - 50 ml;
  • food coloring.
  1. Sift the flour into a bowl and mix with the dry coloring.
  2. Add cold water and stir again.
  3. Pour in hot water, knead the resulting dough thoroughly. It should turn out smooth and without lumps.
  4. Place the dough in the refrigerator for several hours.
  5. Knead it well with your hands again.

Not all products and substances are suitable for making slime. Not everything that looks like slime has the necessary properties. To avoid making mistakes, watch the video.

Video experiments on making slimes from different ingredients

How to give slime the desired properties

Even if the slime didn’t turn out the way you wanted, you can fix it.

  1. Vinegar will make the toy more elastic. Pour in a few drops and the slime will stick better.
  2. By adding hydrogen peroxide, you will get a fluffy mass, this is how fluffy slime is made.
  3. A few drops of glycerin will help make the toy slippery.
  4. Glowing slime can be obtained using fluorescent paint.
  5. If the slime is too soft, place it in a jar, add a few salt crystals, close the lid tightly and leave overnight. The salt will draw out excess water and restore elasticity to the toy.
  6. If the slime is too hard, it will become softer if you place it in a container overnight and add a few drops of water.
  7. To make the toy smell nice, scent it essential oil, food flavoring or vanillin.
  8. Magnetic slime can be made by adding small metal filings or iron oxide to it. Knead the toy well so that the additive is evenly distributed. And then your slime, as if alive, will be drawn to any magnet.
  9. You can create an anti-stress toy by placing slime in balloon. This can be done using a large syringe without a needle.
  10. To increase the size of the slime, place it in a container of water for 3 hours. Don't be alarmed if it falls apart, that's how it should be. Add a little salt and hand or body cream. Stir. The slime will not only restore elasticity, but will also become larger.

Advice! Add colorful foam balls to the soft slime. This will make it colorful and increase its volume.

Storage and care rules

Slime is a capricious toy and its lifespan is short. To prolong it, you need to know how to properly store and care for slime.

  1. The slime is stored in a plastic container with a tightly closed lid.
  2. To prevent the slime from drying out, keep it away from heat sources and do not leave it in the sun.
  3. Dried slime can be revived with a drop of water, and soaked slime with salt.
  4. You need to play with slime. Long-term storage may lead to mold growth. This toy will have to be thrown away.

Slime is an amazing toy for both children and adults. Few people know that you can make slime yourself, and even at home. It will take a little time to prepare and you won’t even need it. great amount materials! Let's look at several ways to make slime.

Boron is sodium tetra borate. It can be bought at any pharmacy and is inexpensive. To make slime you will need: boron (half a teaspoon), water, colorless glue (small bottle), harmless dye, two containers for preparation.

Master Class



Lizun is ready! Store in a closed container. I recommend watching the easiest way to make slime.

Slime made from PVA glue and starch


You will need: PVA glue, liquid starch, thick plastic bag, harmless dye.

If you don’t have liquid starch, you can take dry starch and dilute it with cold water. Proportions: 1 spoon of water to 2 spoons of starch. Natural food dyes are considered the most harmless dyes. You can use gouache paints.

Master Class


Lizun is ready! Store in a closed container. I recommend watching this video.

Soda slime


You will need: baking soda, detergent, natural dye, water. There are no specific proportions of ingredients. The mixture should be thick and homogeneous. The slime can turn out small, medium or large depending on the thickness of the detergent.

Master Class

  1. Take a container and pour a small amount of detergent.
  2. Add water, coloring and soda.
  3. Mix to a thick, homogeneous consistency.


Lizun is ready! After playing with it, be sure to wash your hands. Store in a closed container. I recommend watching this video.

Shampoo slime


You will need: shampoo, shower gel, container for preparation.

Master Class

  1. Take a container and pour a tablespoon of shampoo.
  2. Add a tablespoon of shower gel.
  3. Place in the refrigerator for a day.


Lizun is ready! This slime should only be stored in the refrigerator. I recommend watching the video: how to make slime from shampoo and salt.

Powder slime


You will need: gel-like washing powder, natural dye, office glue, storage containers, rubber gloves.

Master Class



Lizun is ready! This slime should be stored in a closed container. If it becomes softer over time, store it in the refrigerator. I recommend watching the video: how to make slime from washing powder.

Flour slime


You will need: flour, natural dye, cold and warm water.

Master Class



Magnetic slime


You will need: boron, iron oxide, neodymium magnet, dye, phosphorus office glue, water, two containers for preparation.

Master Class



Before making any slime, pay attention to the expiration date of the ingredients! If the slime sticks to your hands too much, add water and starch to it. If the slime stretches a lot and does not stick, add glue. Don't forget to wash your hands after playing with slime!

Every child of the 90s saw the movie, or at least the cartoon, “Ghostbusters.” The name "lizun" came from the name of the cute pet of the hunting team - the ghost Lizun, who constantly chewed something, always slammed himself into the walls and left stains of mucus everywhere behind him. The slime toy is a clot that, when subjected to sudden impact, becomes solid, but when resting it spreads like a liquid. Moms of the 90s will certainly remember the greasy stains on all surfaces touched by this childhood prank. This article will explain what this children's fun is made from and how to make it at home with your child.

How to make slime from glue

The first slime was released back in 1976. By the way, the original name is slime. The amazing properties of this toy, simultaneous elasticity, fluidity, etc., are characteristic of a Newtonian fluid.

  1. Pour detergent into clean, dry dishes. The size of the toy directly depends on the amount of “base”.
  2. Add gouache, dye or glitter.
  3. Baking soda is used as flour for thickness. Therefore, add soda gradually, stirring thoroughly.
  4. Water will be needed to dilute the composition if it turns out too thick.

Slime recipes

It is important to remember that after playing slime you need to wash your hands thoroughly. Do not let the toy get into your baby's mouth or mucous membranes. After use, store refrigerated in an airtight container.

We bring to your attention recipes for making slime at home.

Recipe No. 1 is suitable for young children who still want to try the whole world for themselves. :

  • flour 2 tbsp;
  • food coloring optional;
  • hot water;
  • cold water;
  • dishes;
  • spoon;
  • apron.

What to do to make slime:

  1. Sift the flour and pour into a dry bowl.
  2. Add 100 ml cold water. Stir until completely homogeneous.
  3. Pour in the same amount of cold water. Stir.
  4. Add dye if necessary. Stir for 3-5 minutes.
  5. Place in an airtight container or wrap tightly in cellophane. Place in a cool place.

Here's a recipe for slime online:

  • 50 ml Fairy type detergent;
  • 50 ml of any shampoo.

Mix everything thoroughly and put it in the refrigerator for 3 days. Of course you can try this “art”. Only the reviews for this recipe are mostly negative, no one succeeds.

Other recipes for this prank:

  1. Glue, soda and water. Mix glue and soda until smooth. Water is needed as a density regulator.
  2. 70 ml of liquid starch for washing, 25 g of PVA, a couple of drops of brilliant green. Mix starch and brilliant greens. It is best to make the product in a ziplock bag. Add glue and stir thoroughly directly into the bag. You will get a large clot and some liquid. Drain the water.
  3. Magnetic slime is made from Borex, glue, iron oxide and water. Mix glue, water and boron according to the recipe above. Sprinkle iron oxide over the surface of the finished product and mix thoroughly. There is no point in using dye in this case.

How to make slime: video