This article will consider a fairly detailed overview of products on the market for providing 3G / 4G Internet to the private sector - cottages, country houses, cottages. The article has been updated for 2019-2020.

Types of Internet signal amplifiers:

1. Antenna with built-in 2G/3G/4G modem (MTS, Beeline, Megafon, TELE2, Yota):

In the year 2011-2012, when the development of 3G wireless Internet began, antennas with a built-in modem appeared on the market. Now the price is approximately 6-10 thousand rubles with a modem.

Pros:

1. there are no losses on the coaxial cable that affect the speed of the Internet,

2. flexible cable,

3. The price is quite low.

4. Fast Internet if the antenna is of good quality.

Minuses:

1. Unstable operation of the modem at lengths of more than 5 meters! You have to be prepared that 1-3 times a day you will have to distort the power at the router. And if the router is on the second floor or attic, then this causes only certain emotions :)))

Just because of this problem, the next generation of antennas with a built-in modem and router appeared, which will be discussed in the next section.

2. The seller can slip an old 3G modem. The older the model, the slower the Internet will work. When buying, this point is highly recommended to check.

2. Antenna with built-in router and modem (MTS, Beeline, Megafon, TELE2, Yota):

As for the Moscow region, when you go to the Mitinsky or other radio markets, you will be offered the miracle of the antenna (2 options):

Pros:

1. Antenna cable can be up to 80 meters long! In some cases, this is very convenient! Power and signal are supplied via a single cable. PoE technology.

2. Connectors at the ends of the RG-45 cable (the most popular Internet connector). As a rule, many have a crimping tool. That is, you can not drill a wall or window frame with a large drill diameter to fit the connector, but make a small, neat hole for a thin cable.

Minuses:

1. Such devices do not last long. Because the operating temperature of routers and modem is approximately 0 - 40 C.

Many sellers claim that everything is airtight and the router heats itself. And it really does work in the winter. BUT the worst thing is a cold start, this is when electricity is cut off at -20 C in winter, the router cools down, and then power is supplied and a breakdown occurs. Regarding the upper temperature limit of +40 C - in the summer in the sun in a closed space with a router heating up from work, the temperature reaches more than 60 C.

Both photos are precisely already non-working antennas, which we eventually replaced.

3. Internet signal amplifier CONNECT 2.0, 3.0, etc.

A separate article has been written for this product.

Real cell phone signal boosters look like this...

4. Antenna connected to the router via coaxial cable

It is also a fairly popular option when the router and modem are indoors, and the antenna is placed outside. The cost of such kits is from 10-22 thousand rubles.

Pros:

1. Maximum reliability. Outdoors, only a passive antenna is used, which will not be affected by various weather conditions.

2. Fast Internet with correct installation. The result of testing just such a kit in this article will be shown below.

Minuses:

2. Inconvenience of installation. Prefabricated cable assemblies use an N-type connector and its diameter is 20 mm, which makes it difficult to lay the cable inside the room. The solution is to make 1 connector yourself using a special tool or a soldering iron. Connectors are also smaller in diameter, but they are usually used only for a thinner cable.

3. Using a thick cable. 8D-FB cable has a cross section of 11.1 mm and you cannot hide such a cable in a plinth.

5. Antenna with built-in 2G/3G/4G factory router

4G outdoor router with built-in antenna. The price is approximately 9-12 thousand. You can see the characteristics.

Pros:

1. Cable length up to 80 meters! Signal and power are supplied over a single cable using POE technology.

2. Flexible cable.

3. Maximum internet speed. Supports MIMO technology. No other kit will give you higher speed.

4. The antenna supports absolutely all frequencies from 700 to 2700 MHz and all 2G, 3G and 4G standards.

5. Stability of work at any temperature from -30 to +50 degrees. Factory quality, not basement production from the Mitinsky market :)

Minuses:

1. It is inconvenient to change the SIM card. Strictly speaking, it is not a fact that you will ever need to do this.

2. Not revealed yet :) Perhaps the price will not seem the cheapest.

Recently there was an overview video of such a device:

Common misconceptions when choosing Internet amplifiers

1. 4G/LTE not only works on 2600MHz (2500-2700MHz), but also LTE800 and LTE1800.

At the same time, only LTE800 and LTE1800 practically work outside the city! And many sellers sell a 2600 MHz antenna, which is relevant only within the city.

2. "The greater the gain of the antenna, the better" But no!

The higher the gain, the narrower the antenna pattern and the more difficult it is to accurately point the antenna at the operator's base station! It is rare that someone directs a high gain antenna correctly during installation. According to statistics, 8 out of 10 buyers who have installed such an antenna on their own, do not direct it correctly. After all, it is enough to deflect the direction of the antenna by 2-3 degrees and the gain will not be 27 dB, but the same 3-5 dB. And do not forget that the speed of the Internet does not depend on the signal level, but on its signal-to-noise ratio!

An example of an antenna pattern with a gain of 16 dB (on the left - in the vertical plane, on the right - in the horizontal):

An example antenna pattern with a gain of 27 dB:

In the vast majority of cases, an antenna with a gain of 11-17 dB is sufficient! And how to put it correctly - will be discussed below.

3. I have not seen antennas with a real coefficient of more than 18 dB on the market.

We tested in practice any antenna 20-28 dB and they all amplified the signal by no more than 18 dB, some even less than 14 dB! Many unscrupulous artisanal manufacturers take advantage of the fact that no one can verify the true characteristics of antennas.

4. Active 4G signal amplifier (repeater)

There are similar offers on the sites:

And if you still have the task of choosing and buying a repeater, then you can read.

An example of installing a GSM, 3G, 4G amplification system

How to install the antenna correctly

Now let's discuss one of the most important questions - how to properly install the antenna.

The scheme is this:

The main point is that the higher we raise the antenna, the higher the Internet speed will be, and it’s not even about the signal level, but about its quality, which is scientifically called signal to noise ratio and in many programs and phones is designated EcIo. The less the signal encounters obstacles from the tower of the mobile operator to our receiving antenna in the form of neighboring buildings and forests, the better the signal will be and, accordingly, the speed will be higher.

I usually give this example: they hung the antenna from the window - they got a speed of 5 Mbps, hung it on the roof - 10 Mbps, and hung it on the roof and also raised it to the mast - 20 Mbps. In this case, you can put an antenna on the roof with a gain of 8 dB and get a speed higher than that of a neighbor with a 20 dB antenna outside the window.

This is how the cheaters put it:

And this is correct:

And we get this result:

88 Mbit / s - to be honest, this was a record :) We used a set of equipment with a coaxial cable and a router indoors.

Alternative to 3G/4G Internet

wifi bridge

If there are residential apartment buildings on the horizon with a radius of up to 10 km, then with a local provider that connects apartments, you can agree on a WiFi bridge between the residential complex and your house. 2 antennas are placed towards each other, one on your house, the other on the roof of an apartment building.

In practice, such a connection costs 12 thousand and a tariff of approximately 1000-1500 rubles for 15-30 Mbps. But this is really unlimited Internet, which, unlike 3G / 4G, does not sag in the evening when the load on the network increases. And a good ping up to 8 ms - for those who like to play tanks and other modern games, this is a luxury in the country :)

WiMax

Wimax is a 4th generation connection. In Russia, this communication standard has not been widely used for a number of reasons.

Some small local companies negotiate with telecom operators to lease their communication channel and place their Wimax equipment on towers.

The Internet speed of 10-50 Mbps depends on the remoteness of the tower and the correct installation of the antenna at the subscriber's house. Ping about 40ms. The channel is symmetrical. The cost is about 1000-1500 rubles per month.

TOTAL:

1. It is worth trying to start by looking for alternative options for connecting to the Internet.

2. Don't buy the first antenna you see on the market. Antennas with a built-in router and modem are short-lived. Check the frequency range of the antenna, 4G / LTE works in our country at frequencies of 800, 1800 and 2700 MHz. At the same time, in my opinion, 1800 MHz will be the main speed range outside the city, and 800 MHz will be used in very remote corners, but the speed in it will not be very high due to the narrow spectrum. And the 2700 MHz range is mainly in cities or near densely populated areas.

3. In kits with a coaxial cable, do not save on the cable itself, it is better to take a thicker one and pay a little extra. Some vendors offer TV cable. Yes, it is cheaper, but it has a different wave resistance! You need 50 ohms, not 75, like a television cable.

4. The antenna must be placed high if you do not see the cell tower from the window! This moment affects the speed of the Internet more than the quality of the equipment itself!

Conclusion:

The best 3G/4G Internet signal booster is a passive antenna with a minimum length of coaxial cable OR an external router! And if there is active subscriber equipment (modem, router) inside, then it must fully comply with the climatic conditions of operation!

If you are in Moscow Region, we will help you connect to the best option.

Now so many people work directly on the Internet, they do not have to sit in the office to conduct their business. Many problems are solved through the network, so it is extremely important that a high-quality Internet signal is absolutely everywhere. If the cottage is far enough from the city, plus the tower is not nearby, then you can not hope for high-quality Internet. But what to do in this case, do not go to the country? Build a tower near you? Everything is much simpler: you just need to make an Internet signal amplifier for giving with your own hands.

A bit of theory

Before you learn how to make the best Internet signal booster for a summer residence, you need to understand a little what 3G and 4G are, and what can cause a bad signal.

Not so long ago, many summer residents used satellite Internet, but this technology has almost completely outlived itself, but now the vast majority of people use it, which gives out very good speed for comfortable networking. Today in Russia there are three communication formats - 2G, 3G and 4G. As it was reported a little earlier, in 2 years, in 2020, the most modern format will appear - 5G.

To understand how the classification of communication formats differs, you need to know the following:

• 2G, also known as EDGE, is the slowest mobile Internet, its speed does not exceed 40 Kb / s, today it is practically not used anywhere.
• 3G is the first high-speed Internet, thanks to which you can surf pages very comfortably. The speed of this communication format does not exceed 800 Kb/s.
• 4G - today in Russia - the fastest mobile Internet, its speed is 2-5 Mb / s.
• 5G - since the introduction of such a format has not yet happened, it is rather difficult to say exact numbers, but approximately the speed should be about 1 Gb / s.

These statistics are approximate, because theoretically the speed can increase for each of the points, it all depends on the throughput of the operator.

Amplifier of mobile Internet signal for giving

Each person can personally enhance the signal quality of a 4G modem, which can be purchased at any mobile phone store of the selected operator. To use the Internet through such a modem, you need a computer or laptop. But you should also take into account the connection stability factor, if the operator is not able to maintain an uninterrupted signal (even at low speed), then it is rational to simply change it. Otherwise, the user will still receive a poor-quality Internet connection.

There are several possible options for how to amplify the signal. The most popular are:

1. Extend the USB cable through which the modem is connected to a computer or laptop. Thanks to this, the modem can be placed somewhere higher or even taken out into the street, while the quality of communication will significantly improve.
2. UTP extension cable for 3 or 4G modem. A regular USB extension cable cannot work properly if the cord is longer than 4 meters. In this case, the extension cable can have a high-quality connection with a computer at a distance of up to 20 meters. Therefore, the modem can even be taken out on the roof of the house.
3. Purchase a special internet signal booster. Not the cheapest way, because the cost of a complete set will cost about 2800 rubles. ($50), however, the end result is really worth the money.
4. Make a special antenna with your own hands, which will improve the quality of communication.
5. Change operator. At first glance, such a banal procedure may be the most effective.
6. Select "3G only" or "4G only" mode.

We figured out the main methods for improving the Internet connection, now in more detail about each of them.

Extend modem via USB cable

To improve the quality of the signal, it should be understood that this is a wave that spreads unevenly in different parts of the house. This means that you first need to determine where the signal is strongest and most stable. This will take a little time and patience, when this place is determined, you should proceed to the next step.

Almost all modems display the dBm value, and it is worth paying attention to it. If this value is less than 70, the signal is simply excellent and this is where it is best to place an Internet access point. When the signal level is within 70-80 dBm - the average, if there is no better indicator in the house, then you will not notice much discomfort when surfing the pages. But when the dBm value is more than 100, the signal is very weak.

In practice, it is known that the strongest signal exists near windows and closer to the ceiling. It is best to place the modem somewhere near the roof. In this case, do not worry about the device. All modems are not afraid of winds, rains and frosts, but it is undesirable to expose a device where there is a lot of sunlight.

So, if the place is determined, now you need to recover to the store and simply purchase a USB extension cable of the desired length. It is important to remember that if it is more than 4 meters long, then this procedure loses all meaning, the signal quality will again be poor.

UTP extension

If four meters of extension cable is not enough to seriously improve the signal quality, then in this case you should purchase a special UTP extension cable. Such a device can qualitatively extend the modem up to 20 meters. Therefore, if the access point needs to be taken out to the roof, this is exactly what you need.

The extension consists of three parts:

1. USB port that plugs into a laptop or computer.
2. The port where the modem is connected.
3. UTP cable that connects two ports. You can use a classic UTP-5E cable.

But if 20 meters of cable is not enough for you, then in this case you should purchase a more expensive one. High-quality information transfer will be stable at a distance of up to 50 meters.

for giving

Often in stores you can see special antennas that are designed to amplify the signal. They are purchased along with the required amount of cable, the antenna should be installed on the roof of the house.

The complexity of the installation lies in the fact that one person can not do it. Before mounting the antenna, you should choose its exact direction, which side will have the best signal. The process goes something like this: one person slowly turns the Internet signal amplifier to give, and the second on the computer looks at the dBm frequency and where the value will be the lowest, in this direction the device should be mounted.

The antenna itself is connected to the modem, and the modem, already with a cable, is connected to the computer. It is also worth noting that the modem must be no further than two meters from the signal amplifier, otherwise there will be no result. There are also some connection difficulties. Not all modems have antenna outputs, and those that are are of insufficient quality, so it is likely that you will have to solder the input yourself. If you do not know how to do this, then it is better to attribute the modem to craftsmen who have soldered more than a dozen such devices.

This method is very complicated and costly, moreover, the antenna must be grounded. However, in some cases, it is the antenna that becomes the savior. If the tower is far enough away (more than 10 km), then this is the only right decision.

Do-it-yourself signal amplification antenna

A homemade antenna can be used not only in the country, but also on a hike, it is quite simple to make it. You need to wind a copper wire on a USB modem, it’s quite difficult to say how many turns you need, but there should be quite a few of them. Most of all, the wire should be wound where the SIM card is located. At the end of the wire, you need to make a small screen from an ordinary tin can, and if there is an unnecessary CD, then it is generally ideal for a homemade antenna. Such a simple Internet signal amplifier for summer cottages can improve the quality of communication by up to 20%, which is a very good indicator.

The second version of a homemade antenna

There is also a stationary version of the antenna. From a sufficiently thick copper wire, two rhombuses should be made. In appearance, the antenna should resemble an unrounded figure eight. Solder a regular antenna cable to the rhombus joints, wrap the modem with the other end of the cable, as indicated in the previous example. Mount the antenna with the modem on the roof of the house or put it out the window, and connect the modem to the computer using a USB or UTP extension cable.

Operator change

The quality of the Internet signal directly depends on the proximity of the towers and the quality of the equipment. Therefore, before tinkering with something, it is worth trying to simply change the operator, sometimes this is the simplest and most effective method of signal amplification.

User opinion

But what do they say about what it really is - the best Internet signal amplifier for giving, user reviews? Of all the methods described above, people most often prefer conventional extension cords. In most cases, they help solve the problem. Also, many people respond well to purchased antennas. As for homemade devices, opinions are divided here. Some DIY antennas helped, while others complain that there was no improvement in the signal at all. However, do not forget that people could simply not follow the instructions or simply do something wrong.

Content

All mobile operators that offer Internet access via the 3g network (MTS, Megafon, Beeline, etc.) have a certain coverage area. If you are behind it, then the Internet connection will be very weak, the connection will be unstable, the speed will be low. In such cases, you can use options that will provide amplification of the 3g modem signal.

How to amplify the signal of a 3g modem using speakers

The first option, how to amplify the signal of a 3g modem with your own hands, which you can try at home without any extra spending and effort, is to use ordinary speakers. Mobile Internet users have noted that if you move them closer to the modem, the signal level increases by 10-20%. This is not very much, but with poor communication quality it gives a noticeable increase. To get rid of annoying clicks from the speakers, the volume should be set to a minimum.

Signal booster for 3g copper wire modem

Another way to easily amplify the 3g modem signal with your own hands will require you a little more action than the speaker option. You need to make a structure out of wire and a tin that would act as an antenna. The algorithm of actions is as follows:

1. Take copper wire (preferably a long piece).
2. Open the gadget and make 5-6 turns around the SIM card.
3. Pull the other end to the window.
4. Take a tin can or cut off the neck of a beer to make a "glass". It will act as a reflector that enhances communication.
5. Tape the free end of the wire to the bottom of the can.
6. Rotate the neck towards the nearest operator's tower. The increase in the quality of the Internet will be up to the level of 90-95%.

How to strengthen the signal of a 3g modem with network settings

Before you make antennas with your own hands, you should try another method, how to enhance the reception of a 3g modem signal. Some mobile Internet users do not know that by default, with a low connection quality, the device automatically switches to 2g communication mode, with which it is not possible to work normally. In this case, the transition occurs even in the presence of 2-3 "sticks". To avoid such situations, you should clearly indicate through the device settings that only a 3g connection should be used. How to change an option:

1. run the network setup program;
2. select the "Connection" tab (or with a similar name);
3. then the network search mode needs to be changed from automatic to 3g.

This will force the device to work only on those frequencies without dropping the connection to a slower one. Some modems do not have such an item in the application interface for the device. In this case, you should look for a combination to activate the built-in command in the instructions for the device or on specialized forums. For each modem model, its own order of enabling the option is programmed.

Strengthening the signal of a 3g modem with a USB extension

This is not the best, but a working way, how to easily amplify the 3g modem signal with your own hands. Suitable well for people who do not want to disassemble, solder their device. The design works on the principle of a satellite dish. To make it, you need to buy a “reflector” (a jar, a bowl, a CD), a 3-meter USB “mother-dad” cable. The creation process is as follows:

1. In the middle of the disk, make a mount for a flash drive, or tape it with tape.
2. Connect the cable with one end to the computer and the other end to the modem.
3. You can use a stick instead of a holder or simply fix the disc from the side of the street to the facade of the house.
4. Point the flash drive in the direction where the signal is strongest.

The increase in communication quality is not very large, because the usb cable loses some of it due to the length, but it still improves the connection. The mirror surface of the CD acts as an amplifier. It is recommended to use a bowl instead of a disc because its reflective surface is larger and the reception will be even better. Enameled options are not suitable, use stainless steel products.

Special external signal amplifier 3g modem

Operators are aware of communication problems, so they are constantly trying to expand their coverage area. As an intermediate solution, for example, a 3g signal amplifier was created for the Megafon modem and other companies. This is an antenna that operates at the required frequencies, and you need to connect it directly to the device. When choosing a model, one should rely on the indicators of the radiation pattern and gain.

For effective operation of the antenna, it must be directed towards the tower of the mobile operator, which is closest to your home. Attach the stand so that the pins are perpendicular to the ground. Please note that the longer the cable length, the greater the signal loss along its length. A short cord will provide enough connection gain if the cord is of good quality. If you bought an amplifier, then you should not save on the cable.

How to strengthen the 3G signal with your own hands using a repeater

The most effective is amplification using a special device - a 3G repeater. Amplification is possible only if the phone catches at least a minimal 3G signal. This approach can be called fully professional, because after installing the repeater you will receive:

• the maximum possible amplification of the 3G signal;
• the maximum speed of the mobile Internet, which the mobile operator is able to provide;
• stable reception area within the coverage radius of the internal antenna;
• getting rid of problems that arise with a weak signal: communication breaks, subscriber unavailability, interruptions during a conversation, and others.

A repeater is a house or apartment, which in itself is only part of the 3G signal amplification circuit. To create a complete system, you will need an external antenna that picks up the cellular operator's signal from the base station and an indoor antenna that "distributes" the cellular signal to subscribers indoors. All this is connected by coaxial cable. In difficult cases, boosters, attenuators, splitters and other equipment may be needed. In normal cases, for example, to amplify the 3G signal in a summer cottage outside the city or in a cottage, it is enough to buy a ready-made kit, for example, VEGATEL VT-3G-kit. This kit is optimal in terms of price / quality, it works reliably and you can easily install it yourself. VEGAtel equipment is manufactured in Russia and has all the necessary certificates.

How to strengthen the signal reception of a 3g modem with an internal antenna

Another option on how to strengthen the 3g modem signal with your own hands is to use additional devices to connect to the internal antenna. Each such device has it, but some have an open connector, you can easily connect to it, while in others it is hidden in the case, and to use it, you will have to solder part of the device. In the first case, you just need to buy an amplifier or use a television antenna as a receiver.

If the connector does not exist, then you can take the device to a service center, where, for a reasonable fee, the master will make it possible for you to connect a repeater, which will improve communication with the nearest operator tower. The main drawback of the method is that it will no longer be possible to use the modem only with an internal antenna, so you only need to decide on such a step if you know for sure that you will no longer need it.

A low cellular Internet signal is a problem in remote holiday villages. The easiest way improve signal quality- repeaters or antennas.

If high-rises or dense buildings can interfere with the signal in the city, in the country the interference is:

• Natural barriers in the form of hills, mountains or forest belts.
• If the house is located in the valley.
• A high metal fence is also capable of reflecting signal waves.
• A small number of towers of mobile operators, remote location of the transmission base station.

All signal amplifiers work on a similar principle: the signal is transmitted from the station to an external antenna, which is set to the best communication frequency. Then the signal goes to the repeater, which amplifies its power, and only after that - to the antenna of the internal equipment or a splitter, if there are several points of connection to the network.

If you need professional work on installing a cellular booster system, we recommend MobileBooster, which has been on the market for over 12 years and has a large number of completed projects. This company also has an online store with premium brand repeaters, Rf-Link and PicoCell.

What are Internet amplifiers for giving

There are three main types of equipment:

1. Active signal amplifiers. They are also called 3G and 4G repeaters. The cost varies from 6 to 30 thousand rubles. An active amplifier receives a signal and transmits it to the user in an almost unchanged form, that is, in a good scenario in the country there will be the same Internet speed as at the base station. The radius of action is more than 100 km. The repeater consists of: an internal and external antenna, a receiving unit. An important condition for installation: the external antenna must be located higher than the internal one.

Advantages:

• Significantly improve the signal.
• Can support different ranges.
• Easily mounted.

Flaws:

• They are not cheap.

1. Passive signal amplifiers. These are GSM and CDMA antennas familiar to many. They can stabilize transmission up to 50 km away from a nearby operator station. They consist of a directional boom, a reflector and a director. Mount the antenna in the direction of the nearest operator tower at the highest point of the building. Antennas can be optionally equipped with:

Antenna + built-in modem. Estimated price of a set - 6-10 thousand rubles. It is carried out in a dust- and moisture-proof case, the equipment can withstand a serious load.

Advantages:

• No speed loss on coaxial cable.
• Low price.

Flaws:

• Limited range. Periodically, the signal is interrupted and the router has to be rebooted.

Antenna + built-in router and modem. If this is not a cheap fake, but really factory-made, then such equipment will last a long time. The antenna supports absolutely all frequencies, and the router is protected from temperature changes by a sealed casing. The price of pleasure is 12-18 thousand rubles.

Advantages:

• Stable signal.
• Long cable (up to 80 meters).
• Lack of equipment in the house - it is enough to stretch a thin cable from the outside.
• High speed Internet, support for all frequencies.
• Withstands temperatures from -30 to -50 degrees.

Flaws:

• It is difficult to change the SIM card.
• Handicraft equipment quickly breaks down.

1. mobile models. They are more often used when traveling in a car or at a dacha in nearby regions. Amplify the signal from 2.5 dB. A cable is mounted in the device, which is connected through an adapter to a modem or router. Cost - from 4 thousand rubles.

Advantages:

• Small size.
• Mobility.
• Ease of use.

Flaws:

• Weak signal amplification.
• Not suitable for remote areas.

4G is currently the fastest mobile internet. The speed is 2-5 Mb/s. The signal amplifier can operate at the following frequencies: LTE 900a, 1800, 2500 MHz - it is better to check this information with the telecom operator. It should be noted right away that the nearest tower should be no further than 10-15 km, otherwise the signal will be too weak, and the amplifier will not help. If the signal level is less than 1 bar, it means that the modem and mobile reception is too weak and the device will not work. The main 4G service providers are Megafon, MTS, Beeline.

Internet signal booster for dacha 3G

3G - Internet, the average speed of which does not exceed 800 Kb / s. Not always 3G modems can provide a stable signal. Operators offer mobile Internet in two communication standards - UMTS and GSM - this issue should be clarified with the provider in advance. According to the gain, the device can be classified as follows:

• 14 dB (amplify the signal by 2-3 times).
• 17dB (3-4 times).
• 24dB (5 times).
• 35dB and above (5-10 times).

It is better to take the antenna "with a margin" of gain that is acceptable for your operator - this way you will insure against communication interruptions and improve the signal quality.

How to choose an Internet signal amplifier for a summer residence

When choosing a set of equipment, you should pay attention to the following criteria:

• Gain. The normal gain level is considered to be 24 dB or more. In remote areas, it is better to install equipment with a high coefficient.
• Range. Amplifiers are single-, dual- and multi-range. Multi-band repeaters can be configured for different data rates. You can find out the type of transmitting frequencies from your mobile operator.
• Installation features. Experts recommend installing the antenna as high as possible - it is better to immediately select the appropriate type of mount and cable length.
• Coverage area. For good repeaters, this figure is at least 200 sq.m.
• Working temperature range. For residents of harsh regions, this is almost the main indicator. The gadget must withstand both frost and hot weather.

The best models of signal amplifiers for the Internet and cellular communications

1. The cost of the amplifier is about 12,000 rubles. Coverage area of ​​the device - 250 sq.m. Gain - 30-60 dB. There is overload protection, the number of subscribers is not limited. Supports 3G communication standard UMTS-2100. Withstands voltage from 90 to 264 V, frequency range - 2210-2170 MHz. Universal, with a simple and intuitive interface. Of the minuses: there is no bracket, you need to buy an additional router.

1. Estimated cost - 22 000 rubles. The repeater supports 4G format (LTE 2500). Frequency range 2500-2650 MHz. The gain is 60 dB, there is a smooth manual control of the signal gain. The number of subscribers is not limited, there is overload protection. Coverage area - 500 sq.m. recommended operating temperature: from -10 to +55 degrees. Of the minuses, users note the high price, antennas are not included.

1. Telestone TS-GSM 1800 (China). The price is about 16,000 rubles. Can work with any number of subscribers. Gain 70 dB. Dust and moisture resistant case with protection class IP40. Coverage area - 300 sq.m. Communication standard: GSM, there is overload protection. Frequency range: 1805-1880 MHz. The device is compact in size, suitable for any site. Of the minuses: the kit does not include antennas and cables, complicated installation.

1. The cost is 36,000 rubles. Supports two popular standards 3G and 4G, frequency range 2100-2600 MHz. Coverage area - 500 sq.m. There is a function of automatic adjustment, shutdown when overloaded. The repeater is equipped with a touch LCD display, with which you can manually configure the gadget. Suitable for large objects. The maximum gain is 70 dB. A powerful and easy-to-use device, but not without drawbacks: no antenna included, high cost.

1. The cost is 6000 rubles. Budget and compact repeater. The package includes a repeater, cable and antenna. Coverage area 200 sq.m. Gain: 50 dB. There is overload protection. Supports the GSM 900 communication standard. Frequency range: 1705-1780 MHz. Of the minuses: not the highest quality materials (for example, the antenna is made of aluminum), not suitable for very remote areas and large enterprises.

1. Street II Pro (Russia). The cost is 22,000 rubles. The amplifier is not tied to a specific carrier and works with all SIM cards in the 3G and LTE bands. An external SIM slot makes it much easier to install or replace a SIM card. The device is easy and quick to install and configure even in the absence of experience in such work, has a standard Ethernet (LAN) interface and is recommended for outdoor installation. The amplifier can be connected directly to a computer or any router. Street II Pro will be the best option when connecting high-speed Internet to your country house or organizing a backup communication channel in the office.

After installation, do not forget to test the quality of the coverage: the number of communication indicators (strips) is not an indicator, it is better to download a special program for the modem and make sure how the device works.

Editor's Choice

How to choose the right Internet amplifier for a summer residence - TOP 7 best devices [Rating]

With the help of an Internet amplifier, you can significantly improve the signal quality in the country, at home and in any other room.

Effective devices have been on the market for a long time.

These are the so-called expanders or extenders.

Their main task is to expand the existing signal.

In a rural area or in a place where the network coverage is very poor, it makes no sense to use an extender, since the poor quality of the Internet in this case does not depend on the router, but on the poor network of the operator.

Perhaps there are not enough towers on the territory, the connected ones have a low bandwidth, or buildings, forests, and so on “interfere” with the signal.

To solve the problem of poor Internet in a private house, we recommend using repeaters - These are special gadgets that can increase the speed of the Internet several times by reducing the signal-to-noise ratio.

You can improve the quality of the network using special kits to amplify the 3G-4G signal.

Content:

When choosing an amplifier kit, you should pay attention to the following parameters:

• Coefficient signal amplification. It is customary to consider the values ​​\u200b\u200bof the indicator, which are 8 dB and above, as a normal gain level. Such repeaters are perfect for use in areas remote from the city;
• Frequency range - this is a kind of reproducible band. The larger it is, the more efficient the repeater will work;
• Attachment type. In order for the amplifier to be able to catch the already existing tower signal, it is necessary to install its antenna as high as possible. As a rule, users choose to install the roof of the house. When buying a product, first decide on the type of fastening, and then select the options that are suitable for you;
• Kit cable length . It is determined by the peculiarities of the location of all devices of the set;
• output power (from device to base station).

Also, you should pay attention to the temperature range at which the device will operate in normal mode.

If you live in a region that is characterized by frequent frosts, this indicator will be almost the main one when choosing a gadget.

When choosing an amplifier, consider your location, the approximate distance from the nearest tower to the house, the required number of connection points. Remember that the total baud rate achieved by the amplifier will be divided among all.

Vegatel VT-3G

Estimated cost: 11 900 rubles.

This cellular signal amplifier is the best in terms of price / quality ratio.

Vegatel is a domestic manufacturer of equipment for strengthening communications of various types.

In Russia and other CIS countries, devices from Vegatel are in demand.

The average cost and efficient operation of the device will solve the problem of slow Internet and cellular communications even in the most remote suburban areas.

• The amplifier is capable of capturing a very weak signal;
• Easy to operate;
• The management interface is translated into Russian;
• There is an overload level indicator;
• Affordable cost.

• In the basic configuration there is no bracket;
• No router.

The direction of the antenna must match the approximate position of the station used by the mobile operator.

Telestone TS-GSM 1800

Estimated cost: 15 600 rubles.

Telestone is a Chinese company that deals with . Products are mainly oriented to the Russian market.

The TS-GSM 1800 repeater model is distinguished not only by its good price, but also by the ability to work with any number of subscribers.

Thanks to a gain of 70 dB, you can achieve good signal amplification without interference, even if 100 subscribers in the house work at the same time.

It should be noted the good build quality of the repeater. The case is designed to support IP40 rating, which allows it to keep out moisture, sand and other fine particles. Suitable TS-GSM 1800 for medium-sized rooms, mainly for summer cottages.

• The small size of the repeater;
• The case is protected from ingress of moisture and dirt;
• Large coverage area, which is suitable for any suburban area;
• Good network quality as a result of amplification;
• Unlimited number of network subscribers.

• The package does not include cables and antennas. All components necessary for installing the repeater can be purchased separately from the manufacturer or separately;
• The complexity of installation, because there is no exact instructions with factory components. To configure the operation of this repeater, we recommend contacting a specialist.

The repeater's rugged chassis will handle all weather conditions.

Anytone AT6100W

Estimated cost: 37 800 rubles.

This repeater model is the most powerful of all other TOP amplifiers, however, the price of the device leaves much to be desired.

Anytone AT 6100W is more suitable for large enterprises, factories than for giving.

However, if you want to ensure the maximum quality of the connection and the price is not important to you, feel free to choose this model.

IN complete set devices include:

• The AT-6100W repeater itself;
• External antenna;
• Internal antenna;
• Power adapter;
• Cable 10 m and 5 m (for external and internal antennas respectively). If necessary, you can buy additional skeins from the manufacturer or pre-order the required quantity;
• Instructions for use and installation;
• Warranty sheet. With it, you can exchange the amplifier kit or get your money back if the gadget turns out to be faulty.

Also, the repeater works with the UMTS communication standard (GSM 900 type).

This allows the gadget to work perfectly as a modem.

To connect the Internet to a computer in the country, it is enough to use the Anytone AT 6100W repeater and use a smartphone, or you can work with a 3G modem.

• Reliability. Using Anytone AT 6100W, you will not encounter constant damage to the antenna or other components of the kit. All parts are of the highest quality and will last for many years even in cold climates or sudden changes in weather conditions;
• Convenient design and ease of use;
• Works without interruption at temperatures from -25 to +55 degrees Celsius.

• High price;
• The device is intended for buildings much larger than ordinary cottages.

Vegatel VT-900E

Estimated cost: 11 900 rubles.

This repeater is similar to the TOP leader. The only difference is that Vegatel VT-900E does not support WiFi.

Users can only boost the signal for the cellular network.

Accordingly, in the country it will be possible to use only fast 3G Internet.

Also, this one from VEGATEL has a smaller coverage area than the previous model - about 650 sq. m.

• Good coverage area;
• Stable work;
• Suitable for both cottages and other large buildings;
• Price-quality ratio.

In general, the Vegatel VT-900E repeater is perfect for amplifying a cellular signal in any suburban area.

The repeater will work without problems even if the house is in the middle of the forest or far from the base station.

On the body of the repeater there is a key for adjusting the signal level. Also, this parameter can be adjusted automatically.

There is network overload protection. Normal operation of the device is possible at temperatures from +25 to +55 degrees.

Picocell 900 SXB

Estimated cost: 8 200 rubles.

Picocell 900 SXB is a relatively inexpensive and high-quality repeater that works with the GSM-900 communication standard.

Great for small spaces or houses with 1-2 floors.

Allows you to amplify the incoming signal and transmit it to spread it over an area of ​​up to 200 square meters. m.

The peculiarity of this device is that the developer positions the Picocell 900 SXB repeater as a device for signal amplification in the city.

If you decide to choose this device for giving, it is desirable that the house is close to the base station, or to a large settlement.

• Small size;
• Acceptable price;
• Low energy consumption;
• Build quality;
• Easy to install;
• Well amplifies the signal on an area up to 150 square meters. m.

• Designed to work in the city. There is no way to amplify the signal if it is blocked by large houses or forests;
• Limit on the number of subscribers. Up to 15 different devices can use the "enhanced" network at the same time.

REMO Orange 900 Plus

Estimated cost: 5 500 rubles.

REMO is the name of a Saratov enterprise for the development and production of electrical and radio devices.